Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Tampa?
Panel replacement in Tampa typically costs $250 – $500 for a single section, including the panel, hardware, and labor. Most Tampa homeowners land closer to the middle of that range because our salt air and summer storms speed up rust and impact damage. If you’re replacing two sections or a whole door, expect the higher end of the range or a full installation quote instead.
Panel replacement is the repair we get the most questions about in Tampa, partly because the local math is different from the rest of the country. Between the salt air off the bay, the afternoon thunderstorms that pelt west-facing doors from June through September, and the hail that shows up more often than people expect, panels take a beating here. Here’s what the work actually costs.
Key takeaways:
- A single section runs $250 – $500 in 2026, including hardware and labor.
- Multiple sections or a whole-door panel set usually lands in the $500 – $900 range depending on the door’s brand and style.
- Brand and model matter. We work on garage door repair across every major brand, from Clopay and Amarr to Wayne Dalton and Raynor, so a Clopay panel in Tampa prices differently than a Raynor or Amarr panel.
- We offer free estimates. Call (866) 253-5794 and we’ll give you a real number, not a ballpark from a call-center.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items break down for Tampa-area homeowners in 2026. These are the ranges we see on real jobs, not national averages pulled from a template.
| Line item | Typical Tampa range |
|---|---|
| Single panel replacement (panel + labor) | $250 – $500 |
| Two-section replacement (same door) | $450 – $800 |
| Full door panel set (residential) | $500 – $900 |
| Custom-order or discontinued panel (brand-specific) | $300 – $600 |
| Hardware replacement (hinges, rollers, brackets) alongside panels | $60 – $140 |
| Repaint or color-match to existing panels | $80 – $200 |
| Related repair if a panel swap exposes a problem | varies by repair |
What pushes you toward the top of that range: a custom-order panel for a discontinued line, a brand we don’t stock (we’d have to order it), multiple sections damaged at once, or the addition of painting and hardware work. What keeps you near the bottom: a single standard panel from a widely used line like Clopay or Amarr, no extra hardware, and a straight swap with no surprises behind the panel.
Behind the panel is where costs can shift. On a door that’s been in Florida heat for a decade, the frame and hinges are often fine. Sometimes they aren’t. If the same impact that cracked a panel also bent a hinge or flexed the track, we’ll tell you up front before we touch anything. That’s the difference between a repair estimate and a surprise bill halfway through the job.
What Affects Panel Replacement Pricing in Tampa
The cost of a panel replacement in Tampa tends to move more than people expect, and almost always for one of these reasons:
- Panel material and finish. Steel, aluminum, and wood-look composite panels all price differently. Steel is the most common choice here and sits in the middle. Aluminum is lighter and cheaper for some doors but dents more easily in hail. Wood-look and insulated composite panels cost more but hold up better against Tampa’s humidity.
- Brand and model. A Clopay or Amarr panel is often stocked or quickly sourced. A Raynor or Wayne Dalton panel from a specific production run can need a custom order, which adds both time and cost. We’re trained across all of them, so we’re not guessing which brand yours is or whether the panel is still manufactured.
- How many sections are damaged. One panel is a repair. Three panels is a different project. West-facing doors in neighborhoods like Westchase, Lutz, and Carrollwood often see multiple panels damaged by the same storm cell because the whole face of the door takes the rain and hail at once.
- Rust and salt exposure. Homes near the bay, in South Tampa, and on the coastline age faster than inland doors. Rust on the bottom panel is common, and rust that runs into the frame can mean more than one panel has to come out.
- Insulation and window options. A window panel or an insulated panel costs more than a standard flat panel. If you’re replacing one window section, the color and glass have to match the rest of the door, which can limit what’s stocked locally.
- Access and door height. A standard one-car or two-car door is straightforward. Very tall doors, tight driveways, or a door that’s been jammed closed adds time and equipment. If the door won’t open at all, we may need to address the opener or springs before the panel work can happen.
The labor side is worth explaining. Removing and reseating a panel means releasing the tension on the door and working with the springs and cables. Those parts carry extreme tension and are genuinely dangerous if handled wrong. We handle that part as trained technicians every day. If your door is broken and stuck, that’s not a job to attempt at home. Call us and we’ll take it from there.
How to Save on Panel Replacement
There’s not a lot of wiggle room on panel cost itself, since the panel is what it is. But a few things reliably keep the total down:
- Replace one panel early. A single cracked panel fixed this month is cheaper than a cracked panel that lets water into the door for a year and rusts the frame behind it. The small fix usually stays small.
- Match the existing panel. If your panel is still manufactured in a current color, you avoid a custom order. We check what’s available before quoting, so you’re not paying custom prices for something that’s sitting in a warehouse.
- Combine repairs. If your door needs a panel and the rollers are worn out, doing both in one visit saves the return trip. Roller replacement in Tampa runs $110 – $220, and it’s cheaper alongside panel work than as a separate call.
- Address related wear before it grows. A bent track or a stretched cable left alone will eventually damage the door, and a full door replacement ($700 – $2,200 in Tampa) is a much bigger bill than a panel swap. Whenever you can, fix the smaller item.
- Get a free estimate first. We quote the actual door in front of us, not a phone-book range. Call (866) 253-5794 for a no-cost estimate before you commit to anything.
One thing we won’t do is talk you into a full door when a panel will do. Our whole approach is the right fix, not the easy fix. If your door has six good panels and one bad one, you need one panel. If it turns out the door frame itself is compromised, we’ll say so and give you the numbers both ways. For a deeper look at how we handle the repair side, see our panel replacement service in Tampa.
FAQs – Panel Replacement Cost
How much does panel replacement cost in Tampa in 2026?
A single panel replacement in Tampa runs $250 – $500 including labor. Two sections typically land in the $450 – $800 range, and a full panel set runs $500 – $900 depending on brand, material, and whether the panel is a stock item or a custom order. Call (866) 253-5794 for an exact quote, and estimates are free.
Is it cheaper to repair a panel or replace the whole door?
Repairing a panel is almost always cheaper: $250 – $500 versus $700 – $2,200 for a new door. Replacing the door makes financial sense only when multiple panels are damaged, the frame is compromised, or the door is past its useful life. We’ll show you both numbers and let you decide.
Why do panel replacements cost more on some doors in Tampa?
Custom-order panels, discontinued brands, window panels, insulated panels, and multiple-section damage all push the price up. A Raynor or Wayne Dalton panel from an older production run can cost $300 – $600 for that reason alone. If your panel is a stock color and standard size, you’re more likely in the $250 – $350 range.
Can you replace just one panel on my garage door?
Yes, in most cases. Single-panel replacement is the most common job we do, and it usually costs $250 – $500. The only time we can’t is when the panel is discontinued and no compatible match exists, or when the damage extends into the frame. We’ll tell you which situation you’re in during the estimate.
How much does rust damage cost to fix on a Tampa garage door?
Rust that stays on the panel surface is a panel replacement: $250 – $500 for one section. Rust that’s worked into the hinges and frame usually adds $60 – $140 for hardware. Doors in South Tampa and near the bay see this more often because of the salt air, so it’s worth checking before storm season. Call (866) 253-5794 and we’ll take a look.
One last thought on timing. Tampa’s storm season runs roughly June through November, and the west-facing doors take the worst of it. If you’ve noticed a cracked or dented panel, getting it handled before the next round of storms is almost always cheaper than waiting until the damage spreads. We handle panel replacement, opener repair, and full installation under one roof, so if the panel job turns up an opener issue, we can deal with it in the same visit rather than sending you to a different company.
Pricing reflects the Tampa market as of 2026. Vintage Garage Door Service offers free estimates – call (866) 253-5794.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Carrie Doyle"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Tim Reed"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Priya Reddy